Waterproof Coating

Product Details:

polyurethane floor coating 1 mm

Step 1 : Floor Prepration
Step 2 : Applying Primer Coat
Step 3 : Applying PU coat in any colour finish

Product Details:

Food grade epoxy 2 mm

Step 1 : Floor Grinding Cleaning.
Step 2 : Applying Primer Coat.
Step 3 : Applying Screed Coat (1mm)
Step 4 : Applying Food Grade Epoxy top Coat (1mm) In any colour shade.

Product Details:

The assistance of our genuine vendor base and adroit professionals, we are able to provide high quality products for our customers. Before associating with the vendors, our expert procuring agents conduct a complete market research in order to determine their quality and delivery schedules. Our skilled professionals are highly ambitious and dedicated towards the growth of the company. Moreover, our diligent professionals ensure to keep a safe and organized environment inside the premises, by working in coordination with each other. Our team of trained quality controllers rigorously tests the complete range to eradicate any defect. Owing to our high quality products, we have gained immense trust and satisfaction of our respected clients.

Product Details:

Our company has gained name and fame in presenting Fosroc Nitobond AR Standard.

Product Details:

The assistance of our genuine vendor base and adroit professionals, we are able to provide high quality products for our customers. Before associating with the vendors, our expert procuring agents conduct a complete market research in order to determine their quality and delivery schedules. Our skilled professionals are highly ambitious and dedicated towards the growth of the company. Moreover, our diligent professionals ensure to keep a safe and organized environment inside the premises, by working in coordination with each other. Our team of trained quality controllers rigorously tests the complete range to eradicate any defect. Owing to our high quality products, we have gained immense trust and satisfaction of our respected clients.

Additional Information:

• Packaging Details: 225 gm Per Paunch

Product Details:

We have highly acknowledged organization engaged in presenting a remarkable range of Elastomeric Waterproof Roof Coating.

Method Of Application:

• Surface penetration: All new cement-sand plasters / concrete surfaces should be allowed to cure for 6-8 weeks before surface coating. Clean the surface thoroughly. Remove all laitance, loose material, oil, grease, etc. by mechanical means such as by wire brushing and light grit blasting. Vacuum cleaning may be necessary in some cases. Any visible surface cracks up to 5mm wide should be filled using Kem Crackfill 51. Cracks more than 5 mm wide and separation gaps should be filled using Kem Bond 50, Kem Bond 76 or as specified.
• Priming: Prime the surface with Kem Proof 87 diluted with potable water by volume in 2:1 ratio (2 parts Kem Proof 87 and 1 part water) and allow it to dry for 2 - 3 hours. 
• Application: Use Kem Proof 87 directly from the container. Stir contents well before use. Apply up to 4 coats. Each coat can be applied at 300 - 400 microns WFT. The total thickness shall be around 1.5mm 2 (1500 microns). The application rate is typically 0.55 - 0.9 kg/m per coat. Curing: The coated surface should be air cured for minimum 7 days.

Precautions:

• Do not dilute Kem Proof 87. 
• Do not apply when ambient temperature is below 10 C or above 45 C. Do not apply in windy or dusty conditions.
• Do not apply in direct sunlight or during rains. Adhesion property may get affected over poor quality putty and very smooth surfaces.

Storage:

• Store in accordance with national regulations. The product should be kept in a cool and well ventilated place, protected from heat and direct sunlight. Containers must be tightly closed. Stir the contents before use.

Safety:

• On skin contact: Wash skin with soap and water. Remove contaminated clothes.
• On eye contact: Immediately splash eyes with plenty of water. Consult a physician if irritation persists.
• On ingestion: Do not induce vomiting. Do not give anything to swallow to an unconscious person. Call a physician. 

Product Features:

• Good resistance to UV and atmospheric gases and salts ensures excellent durability.
• Good tensile strength and elongation ensures crack bridging and movement accommodation.
• Highly resistant to water.

Standards:

• Kem Proof 87 complies ASTM D 2240:2002, ASTM E 96:2000, ASTM D 412-02, ASTM C 1202-97, ASTM C 836:1995, BS EN 12390 Part 8:2000

Areas Of Application: 

• Used for coating roofs, it protects concrete structures against carbonation and chloride ingress.
• Typical surfaces include concrete, cement good, woods, bricks, tiles.
•  It can also be used in damp and sunken areas such as under terrazzo or tile floors, shower pans, kitchen, laundry and bathroom floors.  

Product Details:

We offer a shifted arrangement of Elastomeric Waterproof Coating. In addition, experts likewise check this item on various industry main.

Product Features:

• Highly impermeable, safe, non-flammable.
• Pourable consistency, therefore easily brushable.
• Prevents fungal and bacterial growth.
• Very flexible, accommodates movements in cracks, does not crack with age.
• Cold applied, user friendly.
• Does not require curing.
• Dries fast, ready to use with sufficient open time.  

Areas Of Application:

• Asbestos cement roofs and around 'J' hooks.
• Sunken portions of toilets.
• Sewage pipes Plinth, foundation, basements etc.

Method Of Application:

• Clean the required surface to ensure there is no loose material or contamination before coating.
• Moisten the surface adequately prior to application.
• Also allow surface water to evaporate. In case of sunken slabs in toilets, bathrooms, extend the coat by 1 - 1.5 feet above the floor finish level.
• Allow the first coat to dry for 4 to 5 hours, apply the second coat and allow it to dry for 48 hours. (a fibre net cloth must be sandwiched between 2 successive coats especially in the cracks of asbestos sheets).
• Protect the coating from getting damaged by overlaying it with 15mm cement sand mortar.

Coverage:

• 15-20 sq.ft./kg for 2 coats 200 to 300 microns DFT depending on the condition of the substrate

Storage:

• Away from direct sunlight

Shelf Life:

• 12 months from manufacture

 

Product Details: